IEEE 1300-2011 pdf free
IEEE 1300-2011 pdf free.IEEE Guide for Cable Connections for Gas-Insulated Substations.
cable termination: Components (equipment) assembled onto the end of the cable to provide the electrical and mechanical interface into the gas-insulated environment. Typically, this includes a solid insulation barrier between the cablecable fluid and the gas insulation of the GIS.
design pressure of the gas insulation in enclosure: The maximum gas pressure to which a gas-insulated switchgear enclosure will be subjected under normal serice conditions.
dry-Iypc cable termination: A cable termination that comprises an clastomenc electrical stress control component in intimate contact with a separating insulating barrier (insulator) between the cable insulation and the gas insulation of the switchgear. The cable termination does not require any insulating fluid. The dry-type cablc termination may be of plug-in or not plug-in type.
fluid-filled cable termination: A cable termination that comprises of a separating insulating barrier between the cable insulation and the gas insulation of switchgear. The cable termination includes an insulating fluid as part of the cable connection assembly.
GIS conductor end: The end of the GIS high-voltage conductor inside the cable connection enclosure.
main-circuit connection interface: A part of the main circuit providing the current path between the GIS conductor and the cable termination.
metal-oxide surge arrester (NIOSA): A surge arrester utilizing valve elements fabricated from nonlinear resistance metal-oxide materials.
pipe-type cable termination: A cable termination that comprises separating insulating barrier and other termination components that are designed to withstand high fluid pressures of the pipe-type cable system.
removable link connector: A removable connector between the GIS conductor and the end of the cable tcnnination.
sheath voltage limiter (SVA): A device connected to a sheath or to the sheaths of specially bonded cables intended to limit sheath voltages. The three main types are: gapless metal-oxide surge arrester, nonlinear resistances in series with spark gaps, and spark gaps.
surge suppressor: A device operative in conformance with the rate of change of current, voltage, power, etc.. to prevent the rise of such quantity above a predetermined value, This device, commonly comprised of one or more valve elements (non linear resistors) is commonly used for cable connection parts that arc separately grounded.
salve element: A resistor that. because of its nonlinear current-voltage characteristic, limits the voltage across the arrester terminals during the flow of discharge current and contributes to the limitation of follow current at normal power-frequency voltage.IEEE 1300 pdf free download.
