BS ISO 6727:2021 pdf free

BS ISO 6727:2021 pdf free.Road vehicles – Motorcycles and mopeds – Symbols for controls, indicators and tell-tales.
4.9 Each symbol used for the identification of a tell-tale, control or indicator shall stand out clearly against the background.
4.10 Letters and numerals may be used as symbols, but are not registered by ISO/TC 145, Graphical symbols, or published in [5 70QQ. For example, the letters R, N, D, listed as symbols <MG.01 to MG.03>, have the meaning indicated when used in association with transmission gear controls and displays on road vehicles. The fonts shown in this document are not intended to be restrictive; other fonts may be substituted provided that legibility is maintained.
4.11 ‘Failure’ or “malfunction may be conveyed in two ways:
a) Base symbol combined with a colour code according to 51
b) Base symbol combined with failure symbol <MN.02>; optionally, an appropriate colour code in
accordance with 5J. may be added.
4.12 ISO/IEC registration numbers are shown for symbols in this document where applicable.
Registration numbers below 5 000 refer to ISO 7000. Registration numbers above 5 000 refer to
IEC 60417. Artwork in this document might differ from the artwork shown in IEC 60417. ISO 7000 or the
IEC/ISO database on graphical symbols for use on equipment. In this case, the artwork in this document
shall be used.
4.13 The symbol numbers not represented are reserved for those symbols still under consideration at the time of publication of this document. It is envisaged that the status of these symbols and the numbers will be resolved by the next revision of this document.
4.14 Symbols in the annexes (except Annex 0) of this document are presented at 32 % of original size. The grid marks L denote the corners of the original 75 mm square. The grid marks are not part of the symbol but are provided to ensure consistent presentation of all symbol graphics.
4.15 New symbols for functions not yet covered in this document should be constructed using symbols or elements of symbols from this document in a logical manner, keeping the coherence with other symbols already published.
5 Colour
5.1 When the following colours are used on the optical tell-tales, they shall have the meaning indicated below:
— red: danger to persons or very serious damage to equipment, immediate or imminent.
— amber (yellow): caution, outside normal operating limits, vehicle system malfunction, damage to vehicle likely, or other condition which can produce hazard in the longer term.BS ISO 6727 pdf free download.