BS ISO 20957-6:2021 pdf free

BS ISO 20957-6:2021 pdf free.Stationary training equipment Part 6: Treadmills, additional specific safety requirements and test methods.
This document specifies safety requirements and test methods for treadmills in addition to the general safety requirements and test methods of ISO 20957-1. It is intended that this document is applied together with ISO 20957-1.
This document deals with significant hazards, hazardous situations and events relevant to stationary training equipment used as intended and under the conditions of misuse foreseeable by the manufacturer (see Clause 4).
This document is applicable to power-driven as well as to non-power/manually driven training equipment type treadmills (hereafter referred to as treadmills) with the classes S. H and I and classes A, B and C regarding accuracy.
This document is not applicable to treadmills which are manufactured before it publication.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 60335-1. Household and similar electrical appliances — Safety — Part 1: General requirements (IEC 60335-1:2010, modified)
EN 60601-1, Medical electrical equipment — Part 1: General requirements for basic safety and essential performance (IEC 60601-1:2005)
ISO 11201. Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions in an essentiallyfree field over a reflecting plane with negligible environmental corrections
ISO 11202. Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
ISO 12100. Safety of machinery — General principles for design — Risk assessment and risk reduction
ISO 12947-1:1998. Textiles — Determination of the abrasion resistance offabrics by the Martindale method
— Part 1: Martindale abrasion testing apparatus
ISO 20957-1:2013. Stationary training equipment — Part 1: General safety requirements and test methods
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 20957-1 and the following apply.BS ISO 20957-6 pdf download.