BS EN ISO 5912:2020 pdf free

BS EN ISO 5912:2020 pdf free.Camping tents — Requirements and test methods.
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 105-A02, Textiles — Tests for colourfastness — Part A02: Grey scale for assessing change in colour
Iso 105 -B04, Textiles — Tests for colour fastness — Part 804: Colour fastness to artificial weathering:
Xenon arc fading lamp test
ISO 105-X12, Textiles — Tests for colourfastness — Part X12: Colourfastness to rubbing
ISO 139, Textiles — Standard atmospheres for conditioning and testing
ISO 554, Standard atmospheres for conditioning and/or testing — Specifications
ISO 811, Textiles — Determination of resistance to water penetration — Hydrostatic pressure test
ISO 2081, Metallic and other inorganic coatings — Electroplated coatings of zinc with supplementary treatments on iron or steel
ISO 4675:2017, Rubber- or plastics-coated fabrics — Lowtemperature bend test
ISO 6925, Textile floor coverings — Burning behaviour — Tablet test at ambient temperature
ISO 6941:2003, Textile fabrics — Burning behaviour — Measurement of flame spread properties of vertically oriented specimens
ISO 7152. Camping tents and caravan awnings — Vocabulary and list of equivalent terms
ISO 7771, Textiles — Determination of dimensional changes offabrics induced by cold-water immersion
ISO 9227, Corrosion tests in artificial atmospheres — Salt spray tests
ISO 13934-2, Textiles — Tensile properties offabrics — Part 2: Determination of maximum force using the grab method
ISO 13937-2, Textiles — Tear properties offabrics — Part 2: Determination oftearforce of trouser-shaped test specimens (Single tear method)
ISO 23388, Protective gloves against mechanical risks
3 Terms and definitions
For the purposes of this document, the terms and definitions in ISO 7152 and the following apply.
ISO and IEC maintain term inological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at http://wwwiso.org/obp
— IEC Electropedia: available at http://www.electropedia.org/
3.1 base area area limited by the outer tent walls, which contact the ground
Note I to entry: This area does include tents and canopies, but excludes area for guy lines, mud walls and snowskirts.
LSOtJRCE: ISO 7152:1997, 1.3.2, modified — Note ito entry has been added.j
3.2 outer tent dimensions dimension of the smallest rectangular pitching space necessary for the camping tent excluding guy lines
3.3 inner tent area part of the base area (11) designated for living and sleeping
3.4 inner tent dimensions maximum length and the maximum width of the inner tent measured on the ground
3.5 pitching dimensions dimension of the smallest rectangular pitching space necessary for the tent including guy lines
3.6 sleeping capacity number of sleeping berths
3.7 minimum usable weight
weight of the camping tent including the inner and flysheet (where applicable) plus the minimum number of poles, pegs, and guy lines for the camping tent when erected
Note ito entry; Tent pole bags and peg bags do not need to be included.
3.8 total weight
weight of the camping tent as supplied including for example all poles, fabrics, pegs, bags, excluding packaging.BS EN ISO 5912 pdf free download.