Home>BS standards>BS EN 50129:2018 pdf free

BS EN 50129:2018 pdf free

BS EN 50129:2018 pdf free.Railway applications – Communication,signalling and processing systems – Safety related electronic systems for signalling.
This document is apphcable to safety-related electronic systems (including subsystems and equipment) for railway signalling applications.
This document applies to generic systems (i.e. generic products or systems defining a class of applications), as well as to systems for specific applications.
The scope of this document, and its relationship with other CENELEC standards, are shown in Figure 1.
This document is applicable only to the functional safety of systems. It is not intended to deal with other aspects of safety such as the occupational health and safety of personnel. While functional safety of systems clearly can have an impact on the safety of personnel, there are other aspects of system design which can also affect occupational health and safety and which are not covered by this document.
This document applies to all the phases of the life cycle of a safety-related electronic system, focusing in particular on phases from 5 (architecture and apportionment of system requirements) to 10 (system acceptance) as defined in EN 50126-1:2017.
Requirements for systems which are not related to safety are outside the scope of this document.
This document is not applicable to existing systems, subsystems or equipment which had already been accepted prior to the creation of this document. However, so far as reasonably practicable, it should be applied to modifications and extensions to existing systems, subsystems and equipment.
This document is primarily applicable to systems, subsystems or equipment which have been specifically designed and manufactured for railway signalling applications. It should also be applied, so far as reasonably practicable, to general-purpose or industrial equipment (e.g. power supplies, display screens or other commercial off the shelf items), which is procured for use as part of a safety-related electronic system. As a minimum, evidence should be provided in such cases (more information is given in 62) to demonstrate either
— that the equipment is not relied on for safety, or
— that the equipment can be relied on for those functions which relate to safety.
This document is aimed at railway duty holders, railway suppliers, and assessors as well as at safety authorities, although it does not define an approval process to be applied by the safety authorities.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (duding any amendments) applies.
EN 50124-1, Railway applications — Insulation coordination — Part 1: Basic requirements — Clearances and creepage distances for all electrcaI and electronic equipment
EN 50125-1, Railway applications — Environmental conditions for equipment — Part 1: RoIling stock and on-board equipment
EN 50125-3, Railway applications — Environmental conditions for equipment — Part 3: Equipment for signalling and telecommunications
EN 50126-1:2017, Railway Applications — The Specification and Demonstration of Reliability. Availability, Maintainability and Safety (RAMS) — Part 1: Generic RAMS Process
EN 50126-2:201 7, Railway Applications — The Specification and Demonstration of Reliability. Availability. Maintainability and Safety (RAMS) — Part 2: Systems Approach to Safety
EN 50128, Railway applications Communication, signalling and processing systems Software (or railway control and protection systems
EN 60664-1, Insulation coordination for equipment within low-voltage systems — Part 1: Principles. requirements and tests (IEC 60664-1).BS EN 50129 pdf free download.

Related PowerPoint Templates

Template Categories