BS EN 17022:2018 pdf free
BS EN 17022:2018 pdf free.Child care articles – Bathing aids – Safety requirements and test methods.
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 71-3. Safety of toys — Part 3: MigratIon of certafn elements
ISO 7619-1, Rubber, vulcanized or thermoplastic — Determination of indentation hardness — Part 1: Durometer method (Shore hardness)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http://www.electropedia.org/
— ISO Online browsing platform: available at http://www.iso.org/obp
3.1 standalone bathing aid product, that does not provide containment of water by itself and that does not require a child’s bath tub to stand
Note 1 to entry: Figure Ia) shows an example of a standalone bathing aid; Figure Ib) shows an example of a non-standalone bathing aid.
3.1.1 bath cradle standalone bathing aid designed to keep a child in a reclined position during bathing
Note ito entry: These products are intended for use from birth and until the child Is able to sit upright unassisted.
3.1.2 bath seat standalone bathing aid designed to keep a child in a seated position during bathing
Note 1 to entry: These products are intended for use with a child who Is able to sit upright unassisted and until the child begins pulling up to a standing position.
4 Test equipment
4.1 Test probes for finger entrapment
4.1.1 Test probes with hemispherical end Probes made from plastic or other hard, smooth material of diameters (7%.1) mm and (120.1) mm with a full hemispherical end that can be mounted on a force-measuring device, see Figure 2.Mesh probe made from plastic or other hard, smooth material as shown in Figure 3.
4.1.2 Shape assessment probe
Probe made from plastics or other hard, smooth material with the dimensions shown in Figure 4.BS EN 17022 pdf free download.
