BS EN 1264-3:2021 pdf free
BS EN 1264-3:2021 pdf free.Water based surface embedded heating and cooling systems Part 3: Dimensioning.
The EN 1264 series gives guidelines for water based heating and cooling systems embedded into the enclosure surfaces of the room to be heated or to be cooled, It also specifies the use of other heating media instead of water, as appropriate.
The EN 1264 series specifies standardized product characteristics by calculation and testing the thermal output of heating for technical specifications and certification. For the design, construction and operation of these systems, see EN 1264-3 and EN 1264-4 for the types A, B. C, D, H, I and I. For the types E, F and G, see the EN ISO 11855 series.
The systems specified in the EN 1264 series are adjoined to the structural base of the enclosure surfaces of the building, mounted directly or with fixing supports. The EN 1264 series does not specify ceiling systems mounted in a suspended ceiling with a designed open air gap between the system and the building structure which allows the thermally induced circulation of the air. The thermal output of these systems can be determined according to EN 14037 series and EN 14240.
EN 1264-3 specifies the use in practical engineering of the results coming from EN 1264-2 and EN 1264-5.
For heating systems, physiological limitations are taken into account when specifying the surface temperatures. In the case of floor heating systems the limitations are realized by a design based on the characteristic curves and limit curves determined in accordance with EN 1264-2.
For cooling systems, only a limitation with respect to the dew point is taken into account. In predominating practice, this means that physiological limitations are included as well.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 1264-1:2021, Water based surface embedded heating and cooling systems — Part 1: Definitions and symbols
EN 1264-2:202 1, Water based surface embedded heating and cooling systems — Part 2: Floor heating:
Methods for the determination of the thermal output using calculations and experimental tests
EN 1264-4:2021, Water based surface embedded heating and cooling systems — Part 4: Installation
EN 1264-5:2021, Water based surface embedded heating and cooling systems — Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls — Determination of the thermal output
EN 12831 (all parts), Heating systems in buildings — Met hod for calculation of the design heat load
EN 15243, Ventilation for buildings — Calculation of room temperatures and of load and energy for buildings with room conditioning systems
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 1264-1:202 1 apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at https://www.electropedia.org/
4 Heating systems
4.1 Floor heating systems
4.1.1 Basic principles
4.1.1.1 Temperature difference between heating water and room
The temperature difference between the heating water and the room is calculated using Formula (1), see also EN 1264-2. In this Formula, the effect of the temperature drop of the heating water is taken into account.BS EN 1264-3 pdf download.
