Home>BS standards>BS EN 10088-3:2014 pdf free

BS EN 10088-3:2014 pdf free

BS EN 10088-3:2014 pdf free.Stainless steels Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes.
Unless otherwise agreed at the time of enquiry and order, the steelmaking and manufacturing process for steels conforming to this document shall be at the discretion of the manufacturer.
6.2 Delivery condition
The products shall be supplied in the delivery condition agreed at the time of enquiry and order by reference to the conditions given in Table 7 and, where different alternatives exist, to the treatment conditions given in Tables 8 to 19 and 25 (see also Annex A).
6.3 Chemical composition
6.3.1 The chemical composition requirements given in Tables 2 to 5 apply in respect of the chemical composition according to the cast analysis.
6.3.2 The product analysis may deviate from the limiting values for the cast analysis given in Tables 2 to 5 by the values listed in Table 6.
6.4 Chemical corrosion properties
Referring to resistance to intergranular corrosion as defined in EN ISO 3651-2, for austenitic, austenitic-ferritic and ferritic stainless steels the specifications in Tables 8, 9 and 10 apply.
NOTE 1 EN ISO 365 1-2 is not applicable for testing martensitic and precipitation hardening steels.
NOTE 2 The corrosion resistance of stainless steels is very dependent on the type of environment and can therefore not always be clearly ascertained through laboratory tests. It is therefore advisable to draw on the available experience of the use of the steels.
6.5 Mechanical properties
6.5.1 The mechanical properties at room temperature as specified in Tables 8 to 12 apply for hot worked products of every condition, condition 1 U and semi-finished products excluded, for cold processed products in condition 2D (excluding wire), and for each specified heat treatment condition.
For cold processed products of every specified condition, condition 20 and wire excluded, and each specified heat treatment condition, the mechanical properties at room temperature as specified in Tables 13 to 17 apply. For these products, the condition is the prime property with the mechanical properties secondary.BS EN 10088-3 pdf download.

Related PowerPoint Templates

Template Categories